Belt 32mm Double D nickel-plated brass buckle

Reference: 32mm Double D Nickel


Silver-grey coloured cast buckle in a double-D shape, made of nickel plate over brass, on a vegan belt strap. The strap is cut to length and 32mm or one and a quarter inches wide, so a medium width as belts go, which should fit into the loops of most trousers. It  is a classic but slightly chunky design with no sewing; the material is so good that it doesn't need a lining.

After saving your customized product, remember to add it to your cart.

* length is required


Data sheet

Gender, fit Unisex
Size system inches from the buckle to the centre hole, or circumference. Measure what's comfortable when standing and sitting.
Fastening Buckle
Upper 32mm width
Washing Hand wash with soap and warm water. Soaking is OK. Machine .wash at your own risk because of the weight
Drying squash in a towel, then leave in a warm or windy place for several hours
Wear-out Microfibre strap stretches round the holes and gets paler; eventually you can get a new belt strap and use the same buckle.
Bits from Buckle: India, Nickel plating (if any): London, Vegan leather strap material: Spain
Compostable no - but we sell replacement straps with screw rivets to attach to an old buckle
polishing nickel-plate brass is a light silver-grey and doesn't respond to polishing but might reveal interesting brass corners and edges if you use a belt sander
Strap width 32mm, one and a quarter inch, medium belt strap

More info

There's no need to compare belt strap lengths with other clothing sizes - the measurement is just the strap length from the buckle end to the centre hole. If you have an old belt that's comfortable when sitting or standing, you can measure that. If it's about the same width, you can also buy a belt strap from us cut to length with a slot and a screw rivet so you can re-use the old buckle.