Belts
The software that selects size might need changing. If your order fails, just email us on shop @ veganline.com
25mm narrow 1" vegan belts
32mm medium 1.25" vegan belts
38mm wide 1.5" vegan belts -sort by product name to see widths
The software that selects size might need changing. If your order fails, just email us on shop @ veganline.com
25mm narrow 1" vegan belts
32mm medium 1.25" vegan belts
38mm wide 1.5" vegan belts -sort by product name to see widths
Vegan belt with a flat square brass buckle, press-riveted to 3mm thick belt strap. 25mm or 1" - a narrow belt. Sold with keeper loops. Veganline.com/belts
Vegan belt with a Black-painted slider buckle pressed out steel sheet and painted black. These are army surplus belts that have been stored loose for years and have some slight scratches to the paint.Veganline.com/belts
Vegan belt with a chromed roller buckle, press-riveted to 3mm thick belt strap. 25mm or 1" - a narrow belt. Sold with keeper loops. Veganline.com/belts
vegan belt, 25 mm or 1" wide, with Double-D-shape nickel-plate cast buckle, like an old cathode TV screen The strap is 3mm thick microfibre.One inch is on the narrow side for belts and the thick keeper loops tend to make the material look chunky on a narrow belt.Veganline.com/belts
Table place-mats.A4 sheets of microfibre 2mm thick as used for shoes, with the same smooth and slightly grained top layer and an absorbent grey suede-like back. Suitable for craft projects or a start towards quoting for other shapes and sizes - other starting-points are listed below.
2.05mm thick including the wipe-clean waterproof breathable coating which is about 0.05mm thick.Highly absorbent with great wicking and evaporation ability on the soft side. Like most leathers this has a very thin wipe-clean layer on the more shiny side, about 0.05mm thick, which is waterproof breathable but unfortunately rather scuff-able. Stretch...
Vegan belt strap 76mm or 3" wide to use with your own buckle. Thin floppy 2mm thick material for occasional use. It's sold with keeper loops and cut to length with a notch and holes for the screw rivet that holds your buckle on.
