Safety Shoe S2

Manufacturer:

Safety shoe with a 200 joule toe cap made to EU standards. The shoe has thick upper material, a thick sole and strong construction should last for years in normal use, or for a while on a building site.

£42.00

360° View
Drag to spin the image

Description of vegan shoe boot or belt

Some EU safety standards cover strength, breathability, water resistance, slip resistance and ability to absorb shocks so these should be a good  quality pair of shoes even if you don't need the safety steel toe cap. Laces are a cylendrical design that should stay tied, and the sports insole is loose-fitting so it can be taken out and washed or replaced, and it has a lattice of punched holes in it to encourage small flows of air round the inside of the shoe with each step you take. The lining is an absorbent, wicking material and has a padded lip round the top of the heel that should keep these onto narrower womens' feet as well as wider-heel mens' feet.

Shoe sizes, vegan materials & more...

Gender, fit Unisex
Soft or mid-sole none
Footbed Sports shaped insole, removable and washable, over a cellulose board.
Size system Euro sizes two thirds of a cm apart. English translations on the right of the size selector.
Toe Cap 200 joule impact resistant toe cap - a standard called S2, part of EN ISO 20345:2011
Fastening 4 lace holes each side
Upper 2mm microfibre with a breathable plastic coating
Washing Hand wash with soap and warm water. Soaking is OK. Machine .wash at your own risk because of the weight
Drying squash in a towel, then leave in a warm or windy place for several hours
Compostable no - but some Veganline.com shoes last a long time
polishing spray wipe or scrub with oil furniture polish, wax or shoe polish to increase water resistance but reduce breathability

15 more vegan shoes boots and belts: